Skip to content
LUITWAVE

Guide

Sign Board Price in Assam: 2026 Shopfront Cost Guide

See 2026 sign board prices in Assam for glow boards, acrylic LED signs and 3D letters, with worked shopfront examples and a checklist for comparing quotes.

By , Founder, LuitwavePublished Updated

Illuminated white glow sign board with a green cross above a pharmacy shutter at dusk

Short answer

At Luitwave in Jorhat, a standard glow sign board costs ₹210 to ₹300 per square foot and a backlit acrylic LED board ₹550 to ₹850 per square foot. A common 8ft by 4ft shopfront comes to about ₹6,700 to ₹9,600 in glow flex or ₹17,600 to ₹27,200 in acrylic. Frame, lighting, height, access and travel change the final price.

A price per square foot is useful only when both quotes include the same build. One sign maker may quote the printed face alone, while another includes the frame, LEDs, driver and installation. Ask for the full specification before deciding which number is lower.

Key takeaways

  • Standard glow sign boards cost ₹210 to ₹300 per sq ft; backlit acrylic LED boards ₹550 to ₹850 per sq ft.
  • An 8ft by 4ft glow board comes to roughly ₹6,700 to ₹9,600.
  • 3D acrylic letters are priced per letter, from ₹280 each.
  • Compare quotes line by line: face, frame, LEDs, driver, fitting and exclusions.
  • Better contrast and fewer words often help more than a bigger sign.

The prices here are Luitwave’s indicative 2026 rates. They include normal installation within Jorhat town unless stated otherwise. GST, scaffolding, unusual electrical work and travel outside town are quoted separately.

What does a shop sign board cost per square foot?

Sign type Luitwave price Included in the standard quote
Non-lit flex on MS frame ₹95 to ₹150 per sq ft Printed flex, frame and fitting
ACP board with cut vinyl lettering, non-lit ₹250 to ₹400 per sq ft ACP panel, cut vinyl lettering, frame and fitting
Standard glow sign board ₹210 to ₹300 per sq ft Backlit flex, MS frame, LEDs and fitting
Premium glow sign board ₹300 to ₹420 per sq ft Aluminium frame, ACP returns and denser lighting
Non-lit acrylic panel ₹320 to ₹480 per sq ft Acrylic face, graphics, frame and fitting
Backlit acrylic LED board ₹550 to ₹850 per sq ft Acrylic face, LED modules, frame and fitting
Premium acrylic LED board ₹850 to ₹1,200 per sq ft Thicker acrylic, ACP surround and upgraded driver
Double-sided projecting box ₹380 to ₹560 per sq ft Two sign faces, frame and lighting

A projecting sign may need local approval, landlord consent and stronger brackets, so check the site before ordering. The Assam sign permission guide explains the questions to ask.

How much do 3D acrylic letters cost?

Individual letters are priced by height, depth, lighting method and total stroke length. A short name and a long name at the same overall sign width do not cost the same.

Letter type Luitwave price per letter
Front-lit acrylic letter ₹280 to ₹900
Halo-lit acrylic letter ₹450 to ₹1,400
Lit channel letter with metal returns, 12 to 36 inch tall ₹650 to ₹2,200

Send the exact name and intended letter height for a useful quote. “About 10ft wide” is not enough, because a five-letter logo and a 20-letter business name use different amounts of material and wiring.

What do common shopfront sizes cost?

Calculate the face area by multiplying width by height. An 8ft by 4ft board has 32 square feet of face area.

Frontage Non-lit flex Standard glow board Backlit acrylic LED board
Small shop, 6ft by 3ft ₹1,700 to ₹2,700 ₹3,800 to ₹5,400 ₹9,900 to ₹15,300
Standard, 8ft by 4ft ₹3,000 to ₹4,800 ₹6,700 to ₹9,600 ₹17,600 to ₹27,200
Wide, 12ft by 4ft ₹4,600 to ₹7,200 ₹10,100 to ₹14,400 ₹26,400 to ₹40,800

The multiplication gives a planning figure, not a final quotation. Very small signs may carry a minimum fabrication charge, and large faces may need extra supports or be split for transport.

Why can two sign board quotes be far apart?

Face and frame specification

Ask for the acrylic thickness, frame material, section size and finish. “Acrylic board” is a product category, not a complete specification, and the same is true of “glow sign”.

LED modules and driver

The quote should identify the lighting components, module spacing and warranty. Fewer modules reduce cost but may leave dark bands. The driver should be accessible for service and protected from rain.

Installation height and access

Ground-floor fitting from a ladder is different from work above a busy road. Scaffolding, traffic management and difficult wiring add labour and should appear as separate lines in the quote.

Artwork and number of colours

Printed glow faces reproduce several colours at little extra fabrication cost. Cut acrylic logos with many separate shapes need more cutting, wiring and alignment work.

Travel and electrical work

Ask where the installer’s work ends. Luitwave’s standard town installation connects the board to an existing suitable power point. A new circuit, timer, long cable run or work outside Jorhat is extra.

Where does a lower price make sense?

A temporary launch banner does not need the material used for a permanent shop fascia, and a non-lit flex board can be enough for a sheltered daytime business. Large format flex printing covers those short-term needs.

If the sign lists several services, product categories and a phone number, printed glow flex is usually more economical and readable than individual acrylic letters. Read the acrylic versus flex comparison for the trade-offs.

Where can spending more prevent rework?

Pay attention to the frame finish, water drainage, driver enclosure and how the face can be serviced. Ask whether a glow board is built so the printed face can be replaced later, because a removable face lets you update faded artwork without rebuilding the box.

Do not pay for extra size unless the frontage and viewing distance justify it. Better contrast and fewer words often improve visibility more than another two feet of width.

What should a sign board quote list?

Ask any sign maker’s quote to state:

  1. Finished outside dimensions and total face area
  2. Face material and thickness
  3. Frame material, section and finish
  4. LED module and driver details
  5. Print type or acrylic letter construction
  6. Installation, wiring and transport included
  7. Scaffolding, GST and permission fees, included or excluded
  8. Production time, payment stages and warranty

For a firm Luitwave quote, send a straight-on frontage photo, the available width, the installation location and the exact business name on WhatsApp. See current LED glow sign board prices and shop sign board options, or read how installs work in Jorhat and Guwahati.

Frequently asked questions

How much does a sign board cost per square foot in Assam?

At Luitwave's 2026 rates, a non-lit flex board on an MS frame costs ₹95 to ₹150 per square foot, a standard glow sign board ₹210 to ₹300, and a backlit acrylic LED board ₹550 to ₹850. These rates include the frame, lighting where applicable and normal fitting within Jorhat town. GST, scaffolding and travel are quoted separately.

How much does an 8ft by 4ft shop sign board cost?

An 8ft by 4ft board has 32 square feet of face area. At Luitwave's 2026 rates, that is about ₹6,700 to ₹9,600 as a standard glow sign board and ₹17,600 to ₹27,200 as a backlit acrylic LED board. The final figure depends on frame specification, lighting density, installation height and site access.

How are 3D acrylic letters priced?

Individual letters are priced per letter by height, depth, lighting method and stroke length. Luitwave's front-lit acrylic letters cost ₹280 to ₹900 each and halo-lit letters ₹450 to ₹1,400 each. Send the exact name and intended letter height, because a five-letter logo and a 20-letter business name at the same width use very different amounts of material.

Why are two sign board quotes so different?

Quotes often describe different builds. One may cover only the printed face, while another includes the frame, LED modules, driver, wiring and fitting. Face thickness, frame section, module spacing, installation height and scaffolding all move the price. Ask each maker to itemise the full specification before comparing numbers.

Does the sign board price include installation?

Luitwave's standard rates include normal installation within Jorhat town and connection to an existing suitable power point. A new electrical circuit, timer, long cable run, scaffolding above a busy road or installation outside Jorhat is quoted separately. Golaghat, Dergaon, Sivasagar and Guwahati jobs include a travel line in the quote.

Tell us what you need. Get a mockup and a price.

Send a photo of the wall or shopfront, rough sizes and your logo on WhatsApp. We reply with options, a price and a free digital mockup — usually the same working day.

WhatsApp +91 97078 09508 Call the workshop

Mon – Sat, 9:00 AM – 8:00 PM