Skip to content
LUITWAVE
Hospital corridor with a hanging directional sign pointing to OPD and PHARMACY

Wayfinding & safety signs

Wayfinding & Safety Signs in Jorhat, Assam

Coordinated directional, room, fire-exit and safety signs for hospitals, schools, factories, tea estates, hotels and offices across Upper Assam.

From
₹280
per sign
Ready in
5 to 10
working days
Mockup
Free
on every job

Quick answer

Wayfinding signage is the coordinated set of directional, room identification and safety signs that helps people find their way around a building or campus. Luitwave designs and makes wayfinding and safety signs in Jorhat from ₹280 per sign, with complete systems for hospitals, schools, factories and offices quoted per site after a walk-through and a numbered sign schedule.

What you get

  • One coordinated plan for directional, room and safety signs across the site
  • Consistent wording, colour coding, arrows and type sizes on every floor
  • Numbered sign schedule so you know exactly what goes where
  • Fire-exit and safety signs made to the sign list approved for the building
  • Modular slide-in holders so names can change without replacing the sign
  • Ceiling-hung, wall-mounted, projecting and post-mounted options

Why plan wayfinding before ordering signs?

A good-looking door sign cannot fix a route with missing directions. Wayfinding starts by walking the paths a visitor actually uses and marking every point where they have to choose a direction.

The method is simple:

  1. Walk the visitor routes. Entrance to reception, reception to each department, and every place where a corridor branches.
  2. Sign the decision points. A sign is needed wherever someone must choose a direction; signs in the middle of a straight corridor are rarely needed.
  3. Use the same words everywhere. If the directory says “OPD”, the corridor sign and the door must say “OPD” too.
  4. Fix a hierarchy and keep it. One type size for departments, one for rooms, one for notices, so people can scan rather than read.

What is a sign schedule?

A sign schedule is a numbered list of every sign on the site, with its wording, size, material, mounting method and location. Luitwave includes one with every wayfinding quote at no charge, prepared from a walk-through in Jorhat town or from floor plans. Travel for a site visit outside Jorhat town is shown in the quote. It shows the full scope before production, makes approvals easier, and gives each sign an ID so a single damaged sign can be replaced later without re-measuring.

Which sign types does a building need?

Sign type Purpose Typical material
Directional Points to destinations at junctions ACP or acrylic, wall or ceiling hung
Identification Names a room, ward or department ACP or acrylic with modular inserts
Directory Lists what is on each floor Acrylic or ACP board with name strips
Safety and fire Exits, assembly points, extinguishers, PPE Photoluminescent or rigid printed board
Regulatory and notices Rules, timings, restricted areas ACP or acrylic
Outdoor campus Gates, blocks, parking Powder-coated posts, reflective faces

What do different sectors need?

Hospitals and clinics. Patients and relatives are often stressed, so department names, colour coding and arrows must be consistent from the gate to the ward. Emergency, OPD and pharmacy routes deserve the clearest treatment.

Schools and hostels. Signs at child height need secure fixing and durable faces. Check assembly-point and evacuation wording against the school’s fire safety plan.

Factories, warehouses and tea estates. Mandatory PPE signs, hazard warnings, aisle markers and emergency equipment locations. Tea estate factories in Upper Assam also need clear signage for visitors, loading areas and vehicle routes. Use retro-reflective materials where signs are read in low light or by drivers.

Hotels and homestays. Signs should match the interior, but room numbers, reception, dining and exits must stay easy to find. Homestays near Kaziranga and Majuli that host foreign tourists benefit from simple pictograms alongside English and Assamese text.

How do Upper Assam’s conditions affect signage?

Outdoor signs on campuses and factory compounds face heavy monsoon rain, strong wind, high humidity, and dust from nearby roads. Luitwave uses aluminium and ACP faces that do not rust, powder-coated posts, and outdoor-grade vinyl or reflective sheeting. Indoor signs in humid, non-air-conditioned corridors use ACP or acrylic rather than paper inserts, which warp.

How do you maintain wayfinding and safety signs?

Wipe signs with a damp cloth during routine cleaning. Photoluminescent signs need regular exposure to light to charge, so do not cover them or switch off all nearby lighting permanently. Review the sign schedule whenever departments move, and use modular inserts to update names instead of replacing whole signs.

What do we need from you for a quote?

  1. Floor plans or photos of each floor and the main routes.
  2. The list of departments, rooms and destinations to be signed.
  3. Any approved fire or safety sign list for the building.
  4. Your logo and brand colours, if the signs should match them.

Send these through the contact page. Luitwave takes on sites in Jorhat, Sivasagar and Guwahati. For reception and cabin signs, see office branding, and for door plates, see nameplates.

Wayfinding & safety signs price guide

Indicative prices from our Jorhat workshop. Custom work is priced before GST and installation travel. Your exact quote follows the mockup.

ItemPriceNotes
Fire exit or safety sign₹280 to ₹750 eachMaterial and pictograms as per the approved sign list
ACP door or room sign₹350 to ₹900 eachStandard sizes with vinyl or printed graphics
Directional sign, wall or ceiling₹550 to ₹1,600 eachSingle or multi-destination
Floor directory board₹3,500 to ₹12,000Acrylic or ACP with modular name strips
Outdoor campus direction post₹6,000 to ₹22,000Powder-coated post with reflective faces
Sign scheduleIncluded with the quotePrepared from a walk-through in Jorhat town or from floor plans; travel for a site visit outside Jorhat town is shown in the quote

Materials & options

  • ACP and aluminium for door and directional signs
  • Acrylic with standoff mounts for receptions and lobbies
  • Photoluminescent vinyl and board to the specified grade
  • Retro-reflective sheeting for outdoor and vehicle-facing signs
  • Powder-coated posts and frames for outdoor campus signs

Suited to

  • Hospitals, nursing homes and diagnostic centres
  • Schools, colleges and hostels
  • Factories, warehouses and tea estate factories
  • Hotels, resorts and homestays
  • Offices, banks and government buildings
  • Parking areas and campus roads

Wayfinding & safety signs: frequently asked questions

What is wayfinding signage?

Wayfinding signage is the full set of signs that helps someone move through a building or campus without asking for directions. It includes corridor arrows, department and room names, floor directories, and fire and safety signs. When the words, colours, arrows and type sizes are consistent, the separate signs work together as one system.

How much does hospital signage cost in Jorhat?

At Luitwave in Jorhat, individual hospital signs cost ₹350 to ₹1,600 each depending on size and type, and a floor directory ₹3,500 to ₹12,000. A complete system for a small nursing home typically falls between ₹40,000 and ₹1,20,000, depending on floors and departments. After a site walk-through, you receive a sign schedule with a line-item price.

Which fire and safety signs does my building need?

Fire and safety signage requirements depend on the building type, occupancy, height and the conditions of its fire NOC, and are set by the fire service and approving authority. Luitwave makes standard pictogram and photoluminescent signs but does not decide what a building legally requires. Send the approved sign list from your fire consultant or authority, and Luitwave will quote it.

Why should signs be planned together rather than ordered one at a time?

Visitors rely on repeated words, arrows and colours. If a directory says Pathology but the door says Lab, or the arrow style changes between floors, people get lost. Planning the whole system first also prevents missed decision points, duplicate orders and mismatched materials, and usually costs less than ordering signs piecemeal.

Can outdoor signs survive the monsoon?

Yes, with the right materials. Luitwave uses aluminium or ACP faces, powder-coated posts and frames, and outdoor-grade vinyl or reflective sheeting for campus and parking signs. Posts are set firmly in the ground to cope with monsoon storms, and signs are positioned so overhanging trees and run-off do not obscure them.

Tell us what you need. Get a mockup and a price.

Send a photo of the wall or shopfront, rough sizes and your logo on WhatsApp. We reply with options, a price and a free digital mockup — usually the same working day.

WhatsApp +91 97078 09508 Call the workshop

Mon – Sat, 9:00 AM – 8:00 PM