Skip to content
LUITWAVE

Guide

Backlit Wall Art Ideas for Assamese Homes

Backlit and layered wall art ideas for Assamese homes, from rhino and japi to tea gardens and family names, with sizes, wiring, power use and prices.

By , Founder, LuitwavePublished Updated

Laser-cut mandala wall piece glowing with warm backlight above a bed in a dimly lit bedroom

Short answer

Backlit wall pieces are laser-cut panels lit from behind by LED strip, creating a warm halo on the wall. Designs that suit Assamese homes include the one-horned rhino, japi, mandala and family names. Luitwave in Jorhat makes them from ₹3,499 on a 12V plug-in adaptor, and unlit layered wall art such as mandalas from ₹2,200.

A backlit wall piece does two jobs in a room. By day it is a laser-cut artwork; after dark it becomes soft ambient light that makes a plain wall feel finished. For Assamese homes, the strongest designs draw on things people recognise instantly, from the one-horned rhino to the japi.

Key takeaways

  • Backlit pieces are laser-cut panels with LED strip behind them, running from a 12V plug-in adaptor.
  • Designs that suit Assamese homes include rhino, japi, mandala, tea garden and family names.
  • Size the piece to roughly a third to two-thirds of the width of the furniture below it.
  • Plan the socket and cable route before you drill.
  • Luitwave’s backlit pieces start at ₹3,499; unlit layered wall art from ₹2,200.

Which backlit wall art ideas suit Assamese homes?

The one-horned rhino

A backlit rhino wall piece shows a black silhouette of a rhino in tall grass against a warm glow, inspired by the grasslands of Kaziranga. It suits a living room or a long landscape wall, and the wider formats work above a three-seater sofa.

The japi

The japi is instantly recognisable in any Assamese home. The backlit japi-inspired wall piece combines layered plywood with a red acrylic ring. It works well in an entrance or drawing room, where guests see it first.

The mandala

A backlit mandala throws an intricate pattern of light onto the wall. It is a calm choice above a bed, where a mandala works as both decoration and night light.

The family name

A backlit family name panel cuts your surname in flowing script through a dark panel and lights it from behind. It suits an entrance wall or staircase landing, and makes a practical housewarming gift.

Tea gardens and the Assam map

Not every piece needs lighting. The layered tea garden wall art and the personalised Assam map wall art use stacked plywood layers for depth and suit walls that already get good light. The unlit mandala wall art is a lower-cost alternative to the backlit version.

What do backlit and layered wall pieces cost?

Piece Sizes Luitwave price
Backlit mandala 18, 24, 30 inch diameter ₹3,499, ₹4,999, ₹6,999
Backlit japi 18, 24 inch diameter ₹3,499, ₹4,999
Backlit rhino 24 x 12, 36 x 18, 48 x 24 inch ₹3,999, ₹5,999, ₹8,999
Backlit family name 24 x 8, 36 x 12, 48 x 16 inch ₹3,499, ₹4,999, ₹7,499
Mandala wall art, unlit 16, 22, 30 inch diameter ₹2,200, ₹3,400, ₹5,200
Assam map wall art, unlit 18, 24, 36 inch wide ₹2,400, ₹3,600, ₹5,900
Tea garden wall art, unlit 18 x 12, 24 x 16, 36 x 24 inch ₹2,499, ₹3,699, ₹6,499

Prices are from the Luitwave store at the time of writing; each product page shows the current price. Browse all backlit wall pieces and wall art.

Where should you hang a backlit wall piece?

The best spot is a plain wall you see from where you sit in the evening. Backlighting needs a smooth, light-coloured wall to reflect onto, because dark or heavily textured walls absorb the glow.

Good positions include:

  • Above a sofa, with a gap of about 20 to 30 cm above the backrest
  • Above a bed headboard, as a soft night light
  • An entrance or foyer wall facing the door
  • A staircase landing that is otherwise dark in the evening

Avoid walls with monsoon seepage or damp patches, walls directly behind a TV, and kitchen walls where grease settles on the cut edges.

What size of wall piece should you choose?

Size the piece against the furniture or wall space beneath it. A piece of roughly a third to two-thirds of the furniture’s width usually looks balanced.

Wall or furniture below Suggested size
Narrow wall beside a door, under 3 ft 18 inch round or 24 x 8 inch name
Two-seater sofa or single bed 24 inch round or 36 x 12 inch panel
Three-seater sofa or double bed 30 inch round, or 36 to 48 inch wide panel
Large feature wall or staircase 48 x 24 inch rhino, or a planned group

Before ordering, cut a paper template at the chosen size and tape it to the wall. View it from the sofa and doorway at night, when the piece will matter most.

How are backlit wall pieces wired?

Each piece runs on LED strip through a 12V plug-in adaptor, with a thin cable exiting from the back. The low-voltage side is safe to handle, but the adaptor itself needs a proper socket and a dry position.

For a tidy result:

  1. Tell Luitwave where the nearest socket is, so the cable exit can be placed on that side.
  2. Use a paintable cable channel along the wall if the cable would otherwise hang loose.
  3. For a new or renovated room, ask an electrician to add a switched socket near the planned position before painting.
  4. Keep the adaptor ventilated, not sealed inside a wall or taped behind furniture.

Voltage fluctuations are common in parts of Upper Assam, so a surge-protected socket or spike guard is a sensible precaution for any LED product.

How much power does a backlit wall piece use?

LED strip is efficient, and a home-sized backlit wall piece typically draws about as much as one or two LED bulbs. Luitwave confirms the rated wattage for each size, so you can calculate cost from your own tariff.

For example, a piece rated at 10 watts, used for five hours every evening, consumes about 1.5 units (kWh) a month. A plug-in timer or smart plug makes sure it does not stay on all night by accident.

How do you care for backlit and layered wall art?

Dust wooden and acrylic pieces with a soft, dry brush or microfibre cloth. Switch lit pieces off before cleaning, and do not spray liquid cleaners onto cut edges or the LED strip.

Assam’s humid monsoon is gentle on indoor wall art if the wall itself stays dry. If the LED strip or adaptor ever fails, both can be replaced without cutting a new panel.

Custom designs, such as a namghar motif or a business logo, can be made through the backlit wall pieces service and wall art service. Pieces ship across India, and installation can be arranged in Jorhat, Golaghat and Sivasagar.

Frequently asked questions

How much does a backlit wall piece cost?

Luitwave's backlit wall pieces start at ₹3,499 for an 18 inch mandala or japi, or a 24 by 8 inch family name panel. The backlit rhino starts at ₹3,999. Larger sizes range up to about ₹8,999. Unlit layered wall art, such as the mandala, Assam map and tea garden designs, starts from ₹2,200.

How much electricity does a backlit wall piece use?

Backlit wall pieces run on low-voltage LED strip through a 12V plug-in adaptor, so consumption is modest, typically comparable to one or two LED bulbs. The exact wattage depends on size, and Luitwave confirms it for your piece. Multiply the watts by hours of use and your per-unit tariff to estimate cost.

Do I need an electrician to install a backlit wall piece?

Not always. The piece plugs into a normal socket through its 12V adaptor, so a nearby socket is enough. For a clean look with no visible cable, an electrician can add a socket close to the planned position or run a concealed conduit before the wall is painted. Tell Luitwave where the socket is so the cable exit can be placed on that side.

Can a backlit wall piece be dimmed or put on a timer?

The piece runs from a 12V adaptor plugged into a normal socket, so a plug-in timer or smart plug works for scheduling. Luitwave confirms the switch or remote option for each piece before production. For dimming, an inline LED dimmer can usually be fitted to the cable. Ask on WhatsApp before ordering, and Luitwave will confirm a compatible dimmer and adaptor for your size.

Do you deliver backlit wall pieces outside Assam?

Yes. Backlit wall pieces are made in Jorhat and shipped across India by courier with the adaptor and mounting hardware, usually after 5 to 8 working days of production. Installation can be arranged in Jorhat and nearby towns such as Golaghat and Sivasagar.

Tell us what you need. Get a mockup and a price.

Send a photo of the wall or shopfront, rough sizes and your logo on WhatsApp. We reply with options, a price and a free digital mockup — usually the same working day.

WhatsApp +91 97078 09508 Call the workshop

Mon – Sat, 9:00 AM – 8:00 PM